40840001
Used-Paul O Abbe BM-5B ball mill, jacketed. 10 hp motor with belt drive and shaft mount reducer. Jacket rated for 15 psig at 250 deg F. Cylinder 42" diameter x 48" long, 30 cubic feet total capacity. 13 1/4 x 14 3/4 loading port with 6 1/2" diameter built-in wet discharge with 1/4" slots for media retention on opposite side of cylinder. Approximately 24" details
|
40708002
Used-General Machine Ball Mill, carbon steel, 6' diameter, 8' Long, 226 cubic feet. 1702 gallons capacity with 2" lifter bars. Not water jacketed. Mill is mounted on steel legs and pillow block bearings. Includes 12" x 16" grinding door plus the same size grated door for discharge. Mill is enclosed in a steel discharge jacket. Mill is driven by 60 hp Reliance details
|
40708003
Used-Patterson Steel Ball Mill 5' diameter, 4' long, 78 cubic feet. 587 gallon capacity with lifter bars. Serial No. P7416. Not water jacketed. Mill is mounted on steel legs and pillow block bearings. Includes two 9 x 15 " grinding doors plus two same size discharge doors for unloading mill. The two discharge openings are 180 degrees apart so that details
|
40708004
Used-Patterson Steel Ball Mill, 6' diameter, 5' long, 141 cubic feet. 1062 gallons capacity with 1 " lifter bars. Not water jacketed. Mill is mounted on steel legs and pillow block bearings. Includes 12" x 16" grinding door plus the same size grated discharge door. Mill is enclosed in a steel discharge jacket. Mill is driven by a 75 hp Reliance Electric details
|
40708005
Used-Patterson Steel Ball Mill, 4' diameter, 5' long, 63 cubic feet. 474 gallons capacity with 1” lifter bars. Mill is water jacketed and mounted on steel legs and pillow block bearings. Includes 9" x 15" grinding door plus the same size discharge door. Mill is used for wet grinding and has a discharge jacket and trough for discharging slurry from ball details
|
40708006
Used-Patterson Steel Ball Mill, 6' diameter, 5' long, 141 cubic feet. 1062 gallons capacity with 1” lifter bars. The mill is water jacketed and mounted on steel legs and pillow block bearings. Includes 12" by 16" grinding door plus the same size grated discharge door. Mill is used for wet grinding and has a discharge jacket and trough for discharging details
|
40708007
Used-Patterson Steel Ball Mill 3' diameter, 4' long, 28 cubic feet. 210 gallons capacity with 1" lifter bars. Mill is water jacketed and mounted on steel legs and pillow block bearings. Includes 8" by 10" grinding door plus the same size grated discharge door. Mill is enclosed in a steel discharge jacket and is driven by a 15 hp, 1730 rpm TEFC Patterson details
|
40708008
Used-Paul O Abbe Model 4A-BM Steel Ball Mill, 3' 8" diameter x 4' long, 44 cubic feet. 330 gallon capacity with removable lifter bars. Mill is water jacketed with steel legs and pillow block bearings. Includes 8" by 10" grinding door plus the same size grated door for discharge. Mill is enclosed in a steel discharge jacket. Mill is driven by a 20 details
|
40708009
Used-Paul O Abbe No 6 Ball Mill, 2.5' diameter x 3' long, 14.7 cubic feet. 110 gallons capacity with lifter bars. Not water jacketed. Mill is mounted on sSteel legs and I beams and has roller bearings. Includes 8" by 9.5" grinding door plus the same size grated discharge door. Mill is enclosed in a steel discharge jacket. Mill is set up for either details
|
|
|
REQUEST PRICE QUOTE
Diameter (in.): 19.5
Length (in.): 31.2
Manufacturer: Welte Mahltechnik
HP: 3.3
13607003
Used-Welte Mahltechnik ball mill, type WPM 200-S-2. Material of construction is ceramic on product contact parts including balls. Total capacity is 66 gallon (250 liter), working capacity is 53 gallon (200 liter). Approximately 19.5" (500mm) diameter x 31.2" (800mm) straight side milling chamber. (1) 11.7" diameter (300mm) product in and outlet. Belt details
|
|
|
89585
USED: Paul O Abbe ball mill, model 6BM. Carbon steel Teflon lined jacketed chamber. Internal rated atmos, jacket rated 40 psi. 32" diameter x 36" long, 40 total gallon capacity, 1 end removable. 6" x 8" charge port with cover. Driven by a 7.5 hp, 3/60/230/460 volt, 1740 rpm motor with reducer, ratio 22:1, approximate 28.5 rpm final output. Unit mounts details
|
87573
USED: Paul O Abbe ball mill, model BM-1. Carbon steel jacketed chamber, non-lined. 72" diameter x 60" long, 1057 total gallon capacity. 12" x 14" charge port, no cover, 3" liquid discharge. Unit gear driven by a 40 hp, 3/60/460 volt, 1800 rpm motor thru a reducer, approximate 15 rpm final output. Unit mounts on approximately 72" high stands. Built 1983. details
|
87574
USED: Paul O Abbe ball mill, model BM-1. Carbon steel jacketed chamber, non-lined. 72" diameter x 60" long, 1057 total gallon capacity. 12" x 14" charge port, no cover, 3" liquid discharge. Unit gear driven by a 40 hp, 3/60/460 volt, 1800 rpm motor thru a reducer, approximately 15 rpm final output. Unit mounts on approximately 72" high stands. Built 1983. details
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|