|
|
41347001
Used- Collette High Shear Granulator, 150 Liter, Model GRAL150. This is a standard GRAL granulation mill with top-entering 3 winged anchor blade, and top entering high speed chopper. The unit features a stainless steel bowl with powered bowl lift and pneumatic stainless steel plug valve. Includes a free standing control panel. Bowl, agitator, blades, and details
|
|
|
|
|
40944001
Used- Fryma Triple Shaft Vacuum Mixer, Model VME-20, stainless steel. 38 liter total capacity, 20 liter working capacity, internal rated -1 bar (vacuum internal) at 95 deg C, jacket rated 4 bar (58 psi) at 152 deg C. Anchor agitator with bottom and side wall scrape driven by an approximate .18 kw motor, high speed disperser driven by an approximate (.75) details
|
13527018
Used-Ross 40 gallon double planetary mixer. Stainless steel contact parts. With jacketed mix can and non-vacuum dust hood. Air/oil hydraulic lift. Mix can on casters. 15 hp XP motor is 3/60/230/460V, 1745 rpm into Delroyd gearbox model HV70, serial #150268, 49.26 ratio. Mechanical variable speed crank. UL listed start/stop. Limit switch. details
|
13527017
Used-Ross 25 gallon double planetary mixer, model HDM-25. Stainless steel contact parts, change can style with air/oil lift. 10 hp XP US Electric motor is 3/60/230/460V. Mechanical variable speed crank. Portable mix can (non-jacketed) on casters with lifting lugs. Approximate 2" diameter side bottom outlet with ball valve. Non-vacuum dust hood. Manufactured details
|
|
|
|
|
40037544
Used- Ross Turbo Emulsifier, Model TE.3-10, stainless steel. 3-10 liter mixing capacity. Approximately 10'' diameter x 10'' deep stainless steel jacketed can, internal rated 21.8 psig at 260 deg F, jacket rated 72.5 psi at 260 deg F. Anchor style agitator driven by a 3/4 hp, 3/60/208-230/460 volt, 1725 rpm gearmotor, ratio 11.2 to 1, emulsifier driven details
|
40339001
Used- Ross double planetary mixer, model LDM-1, 304 stainless steel. .95 gallon working capacity, 1 gallon total. 8-1/4" diameter x 5" deep carbon steel jacketed mixing bowl, vacuum tilt back top cover with charge ports. 4-1/2" wide stirrers. Unit driven by a 1 hp, 1/60/115/230 volt, 1725 rpm XP vari-speed motor, min/max rpm 500/2500. Orbital speed approximately details
|
|
|
40341007
Used- Scott Turbon Double Planetary Mixer, Model 220GALDPM, approximately 220 gallons, 304 stainless steel. (1) 15-5PH stainless steel stirrer, (1) missing, vacuum hood with charge port, (2) 43 1/2'' diameter x 37 1/2'' deep dimple jacketed mixing cans. Driven by a 50 hp, 3/60/230/460 volt, 1765 rpm hydraulic power pack. Includes (2) 5 hp vacuum pumps with tank. details
|
40311003
Used- Ross double planetary mixer, model HDM40, 304 stainless steel. 8-40 gallon working capacity. 25'' diameter x 22'' deep carbon steel jacketed can. Air/oil lift, top vacuum dust hood with charge ports, (2) stirrers. Approximate orbital speed 9-37 rpm, stirrer speed 10-39 rpm. Driven by a 10 hp, 3/60/230/460 volt, 1760 rpm varispeed motor, ratio 49.32 details
|
40311005
Used- Ross double planetary mixer, model HDM100, 304 stainless steel. 10-100 gallon working capacity. 34 1/2'' diameter x 28'' deep carbon steel jacketed can, rated internal FV, jacket 90 psi at 331 deg F. Air/oil lift, top vacuum dust hood with charge ports, (2) stirrers. Approximate orbital speed 8-30 rpm, stirrer speed 9-34 rpm. Driven by a 30 hp, details
|
40311006
Used- Ross double planetary mixer, model HDM100, 304 stainless steel. 10-100 gallon working capacity. 34 1/2'' diameter x 28'' deep carbon steel jacketed can, rated internal FV, jacket 90 psi at 331 deg F. Air/oil lift, top vacuum dust hood with charge ports, (2) stirrers. Approximate orbital speed 8-30 rpm, stirrer speed 9-34 rpm. Driven by a 30 hp, details
|
40037084
Used- Ross Double Planetary Vacuum Change Can Mixer, Model HDM200, 316L stainless steel. (2) 316L stainless steel stirrers, Teflon scraper blade on bottom of one stirrer. Driven by an approximately 50 hp motor, NEMA 12 AC variable frequency inverter rated 6 to 26 rpm output. Mixer has a heavy duty mix can locking arrangment with large diameter pins. With details
|
90543
USED: T.K. AGI Lab Size Vacuum Mixer Emulsifier, 2 liter working capacity (4 total), model 2M-2. 6" diameter x 8" deep glass mixing jar with manual up/down. 304 stainless steel anchor style agitator with side and bottom sweep, driven by a .4 kw, 1/60/100 volt, 1720 rpm motor thru varispeed drive, approximately 15-120 rpm. Center homo mixer driven by a .4 details
|
90341
USED: Ross Versa Mixer, model PVM-100, 304 stainless steel. Rated for full vacuum (29.5" HG) and 5 psi air for discharge purposes only. Change can design, triple agitation. (1) Anchor style agitator, driven by a 15 hp, 3/60/460 volt, 1755 rpm xp motor, approximate 19-58 rpm range. (1) High speed disperser, driven by a 15 hp, 3/60/460 volt, 3525 rpm xp details
|
89427
USED: Premier lab size vacuum double planetary mixer, model PLM 1.5, 316 stainless steel. Mixing capacity 1.40 liter (0.38 gallon), total 1.73 liter (0.46 gallon). Orbital speed 12-47 rpm, stirrers 33-128 rpm. Jacketed top stationary cover with sight glass, manual raise 6" diameter x 4" deep stainless steel jacketed mixing can. Unit driven by a 1/4 hp, details
|
89145
USED: Ross Versa Mix, model PVM2, stainless steel. Change can design. Approximately 9-1/2" diameter x 9" deep jacketed can, approximate 1" outlet, triple agitation. (1) Anchor style agitator, driven by a 1/2 hp, 3/60/208-230/460 volt, 1725 rpm XP motor thru a reducer, 14-140 rpm range. (1) High speed disperser, driven by a 3/4 hp, 3/60/208-230/460 volt, details
|
88925
Used- Ross Double Planetary Mixer, Model LDM-2, 304 Stainless Steel. 1 quart to 1.5 gallon working capacity, 2 total. 9-3/4" diameter x 6-1/2" deep non-jacketed bowl. Top vacuum hood with sight glass. (2) 5" wide stirrers. Unit driven by a 1 hp, 3/60/208-230/460 volt, 1725 rpm XP varispeed motor, min/max rpm 500/2500, thru reducer, ratio 25:1. Orbital details
|
87912
USED: Ross Versa Mix, model PVM-100, 304 stainless steel. Change can design, triple agitation. (1) Anchor style agitator, driven by a 10 hp, 3/60/230/460 volt, 1755 rpm motor thru a reducer, 19-58 rpm range. (1) High speed disperser, driven by a 10 hp, 3/60/230/460 volt, 1765 rpm motor, 570-1700 rpm range. (1) Mixer emulsifier driven by a 10 hp, 3/60/230/460 details
|
87484
USED: Tokushu Kika triple shaft vacuum disperser/kneader Combimix mixer, model 38L-10, 304 stainless steel. Approximate 10 gallon working capacity. Jacketed can 10-3/4" diameter x 20" straight side, dished top and bottom. (1) Slow speed 2 blade anchor style agitator, driven by a 1 hp, 3/60/208-230/460 volt, 1730 rpm gearmotor, ratio 11:1, approximate 22-220 details
|
87197
USED: Jaygo dual shaft variable speed mixer, model DSVS60/40, 304 stainless steel. 400 gallon working capacity non-jacketed can, 56" diameter x 36" straight side x coned bottom, open top. (1) Slow speed 3 blade anchor style agitator, driven by a 50 hp hydraulic motor, speed range 0 to 50 rpm. (1) High speed pitched four blade impeller, driven by a 75 details
|
522596
USED: Ross model CDA-50 (new model number of PVM series). Dual shaft design, 50 gallon working capacity, 65 gallon total capacity, sanitary stainless steel construction. Unit has 2 blade anchor agitator driven through 5 hp motor, high speed disperser driven through 10 hp motor, air/oil hydraulic lift, 2 stainless steel jacketed mix cans with stainless steel details
|
522597
USED: Turello 2.5 gallon vacuum dual shaft mixer, stainless steel, model TMD-10 (5.20.2SV). Dual shaft vacuum mixer with can, stainless steel construction, 10 liter (approx 2.5 gallon) working capacity. Dual hydraulic variable speed motors to drive shafts, (1) slow speed 2 blade scraper shaft, (1) high speed disperser shaft. Unit is set up to accept a third details
|
|
|
|
|
84899
USED: Turello planetary mixer, model TMD/PL16, stainless steel. Approximately 4.2 gallon capacity. 12" diameter x 9" deep jacketed 304 stainless steel mixing bowl, vacuum hood with (2) sightglasses/charge ports. (2) 316 stainless steel mixing bars with 4" diameter blades, (1) 316 stainless steel center mixing bar, (1) fixed side scraper. All separately hydraulically details
|
84782
USED: Ross double planetary mixer, model HDM10, stainless steel. 2-12 gallon working capacity, 15 gallon total. 18" diameter x 13-1/2" deep carbon steel jacketed mixing bowl, air/oil lift, requires dust hood. 10" wide 304 stainless steel stirrers. Unit driven by a 5 hp, 3/60/208-220/440 volt, 1755 rpm XP varispeed motor with reducer, ratio 4.3:1, min/max rpm details
|
84567
USED: Molteni planetary mixer, type PH/H2000SV. Material of construction is stainless steel on product contact parts. Working capacity 529 gallons (2000 liters). (1) Butterfly mixing arm 0-200 rpm and (1) butterfly mixing arm 0-150 rpm, driven by a 297 hp/198 kw hydraulic power packet. (1) Side scraper with integrated temp sensors 0-30 rpm, driven by a 55.5 details
|
83442
USED: Jaygo dual shaft variable speed mixer, model DSVS 1/0.5, 316 stainless steel. Change can design. 2 gallon working capacity, 3.5 total. (1) 10-1/2" diameter x 9-1/2" deep jacketed can, 2" bottom outlet. (1) Anchor style agitator with scrapers, driven by a 1/2 hp, 3/60/230/460 volt, 1800 rpm gearmotor, ratio 7.04:1. (1) Disperser agitator driven details
|
|
|
82356
USED: Ross Versa Mixer, model PVM2. 1-1/2 gallon mixing capacity. Hastelloy B-2 change can. 9.5" diameter x 9" deep, jacketed, rated 100 psi/FV @ 400 deg F. 1-1/2" diameter bottom outlet with valve. Flat bolt down top cover. Air/oil hydraulic lift. Triple agitation, includes 3 blade anchor, (1) sawtooth disperser and (1) missing emulsifier. Main drive 3 details
|
|
|
|
|
81611
USED: Hong Yun Machinery planetary Powermix, model DLH-2. Mixing capacity of .75 to .50 gallons, total capacity of .6 gallons, 304 stainless steel. Jacketed mix can 6-3/4" diameter x 6-1/2" deep, top vacuum hood with (2) sight glass/charge ports. 3" diameter sawtooth disperser blade, driven by a 1.1 kw (1.5 hp), 3/60/480 volts, 3430 rpm motor, approximate details
|
81559
USED: J H Day Regal vertical planetary mixer, model 5, 304 stainless steel. Approximate 7 gallon working capacity, 10 total. (2) solid agitator blades. Top feed chute, hydraulically operated bowl lifting mechanism. Driven by a 4 speed motor 5/3.2/2.5/1.7 hp, 3/60/220 volt, 1750/1150/870/570 rpm XP motor with clutch, XP controls and amp meter. Mounted details
|
81299
USED: Ross Versa Mix model PVM-10. 10 gallon mixing capacity, 321 stainless steel, change can design. Triple agitation, 18" diameter x 13-1/2" deep carbon steel jacketed can, off-center bottom outlet. (1) sawtooth blade disperser (no blade), driven by a 5 hp, 3/60/230/460 volt, 3480 rpm XP motor. (1) 3 blade anchor agitator driven by a 3 hp, 3/60/230/460 details
|
|
|
76207
USED: Tokushu Kika Kogyo Co Ltd planetary mixer. 100 gallon capacity with explosion proof control panel. Traction drive 3.7 kw, 4 pole, 200/220 volt, 50/60 rpm, 14.5/13 amps, frame type YT FOXX Form K. Hydraulic pump motor 3 hp, 200/220 volt, 2.2 kw, 4 pole, 9.3/8.2 amp, 1420/1750 rpm, frame 100L Type 1 K. Panel has vacuum controls. Tank is jacketed. details
|
|
|
72995
USED: Premier Mill Hidrobat planetary mixer, model HB10, stainless steel. 1.5 gallon working capacity, 2.5 total. Jacketed bowl 9-3/4"diameter x 8" deep, vacuum hood with 6" wide sightglass/charge port. 2 pin style mixing blades, (1) 3" diameter high speed dispersion disc, 1 teflon side scraper. 1.5 hp, 460 volt motor. details
|
|
|
65384
USED: Ross double planetary mixer, model HDM-75. 304 stainless steel construction (product contact areas), (2) stainless stel change cans 34-1/2" diameter x 22-1/2" deep on casters, stainless steel hood (not vacuum rated), 7" x 14" charge port with cover, (2) mixing tools, (1) side scraper, 10 hp variable speed drive 230/460 volt/1155 rpm, XP, Class 1, details
|
65255
USED: Tokushu Kika Combimix mixer, model 2T-160, 316 stainless steel. Unit consists of: 1 double planetary mixer on 1 end with (2) 19" wide rectangular blades, driven by a 15 kw, 200 volt, motor. Includes a 175 gallon stainless steel mixing tank on casters, 1" side bottom outlet. 1 planetary/powermix on 1 end with a 6" diameter dispersion blade, driven details
|
65083
USED: Jaygo double planetary kneader mixer, model MPVD-60. 304 stainless steel (product contact areas), 12 gallon (45 liter) working capacity, (2) 4 finger kneading bladess for high efficiency mixing, (1) 6" diameter hi-shear dispersion blade, vacuum rated hood with feed chute, sightglass and light, 7.5 hp explosion proof planetary motor, 10 hp disperser drive details
|
65084
USED: Jaygo double planetary kneader mixer, model MPVD-10. 304 stainless steel (product contact areas), 1.5 gallon (6 liter) working capacity, hood vacuum rated, (2) 4 finger kneading blades 75 rpm - 300 rpm, (1) 3" diameter hi-shear dispersion blade, speed range 600 rpm - 2400 rpm, (1) teflon side scraper (replaceable), planetary gearbox speed 30 rpm - 120 details
|
|
|
62702
USED: Premier vacuum double planetary mixer, model PLM-5, stainless steel. Mixing capacity 3 liter (.79 gallon), total 5 liter (1.32 gallon). Orbital speed 8.5-34 rpm, stirrers 22.4-90 rpm. Top cover with 3" sightglass/charge port. Unit driven by a 1/2 hp, 3/60/208-230/460-480 volt, 1725 rpm gearmotor, approximate 35 rpm output. Air operated bowl lift, details
|
62535
USED: Ross #225G planetary mixer (modified Ross HOM) 225 gallon. Stainless steel, 44" diameter x 42" deep, jacketed mixing tank with 6" Gemco spherical valve, vacuum hood with 4", 10", (2) 8", 8" tri-clamp charge port, (1) 4" vent, mounted on carbon steel frame, with variable speed 40 hp 230/460/1180-1880 rpm XP motor, speed changes pneumatically thru details
|
62536
USED: Ross #225G planetary mixer (modified Ross HOM) 225 gallon. Stainless steel, 44" diameter x 42" deep, jacketed mixing tank with 6" Gemco spherical valve, vacuum hood with 4", 10", (2) 8", 8" tri-clamp charge port, (1) 4" vent, mounted on carbon steel frame, with variable speed 40 hp 230/460/1180-1880 rpm xp motor, speed changes pneumatically thru details
|
62537
USED: Ross #225G planetary mixer (modified Ross HOM) 225 gallon. Stainless steel, 44" diameter x 42" deep, jacketed mixing tank with 6" Gemco spherical valve, vacuum hood with 4", 10", (2) 8", 8" tri-clamp charge port, (1) 4" vent, mounted on carbon steel frame, with variable speed 40 hp 230/460/1180-1880 rpm XP motor, speed changes pneumatically thru details
|
|
|
48323
USED: Fryma processing plant, VME-20, stainless steel. Total capacity 37 liter (9.7 gallon), working 20 liter (5.2 gallon). Jacketed mix tank, rated 3 bar (45 psi), 14 1/4" diameter x 14 3/4" deep, flat bottom with 1-1/2" bottom outlet. Includes (1) anchor agitator, 1.1 kw 3/60/460V/3440 rpm; (1) dissolver, 0.18 kw 3/60/46V/1700 rpm; (1) colloid mill 0.72 details
|
|
|