More Info
Gallons: 42.3
Material: 304/321 stainless steel
Blade Type: sigma
HP: 16.5
40328034
Used-AMK mixer/extruder, type VI U160 IIV. Material of construction is 304/321 stainless steel on product contact parts. Jacketed bowl, not rated for vacuum, 52.9 gallon (200 liter) total capacity, 42.3 gallon (160 liter) working capacity. Sigma style blades with wear liners. Blade speed 23/19 rpm via gearbox by a 16.5 hp/11 kw-380 volt/50 cycle/3 ph-1500 details
|
More Info
Gallons: 166.67
Material: carbon steel
Blade Type: sigma
HP: 82.5
40328029
Used-AMK Mixer/Extruder, type VIU630IV. Material of construction is carbon steel on product contact parts. Capacity 166.67 gallons (630 liters). Jacketed, rated for 45 psi (3 bar) at 482 deg C (250 deg F). Z-blades driven by an 82.5 hp/55 kW motor. Screw discharge driven by a 45 hp/30 kW motor. Overall dimensions: 11'10" long x 8'3" wide x 7'1" high details
|
More Info
Gallons: 75
Material: stainless steel
Blade Type: sigma
HP: 20
10986002
Used-Used: Approximately 75 gallon food grade double arm mixer/extruder. Bowl dimensions: 27" front to back x 32" left to right x 27" deep. Stainless steel on product contact areas. Jacketed bowl, tangential sigma blades. Discharge screw. 20 hp motor on the blades and 5 hp motor on the screw. Hinged cover and safety grate. Start/stop panel. details
|
More Info
Gallons: 52.85
Material: carbon steel
Blade Type: masticator
HP: 22.5
10147032
Used-Werner Pfleiderer UK-14 X/AU Double Shaft Kneader/Mixtruder. Mild steel, masticator arms, working capacity 52.85 gallons (200 liter), total capacity 66 gallons (250 liter), trough sizes 29" x 26.97" (740 x 685 mm), with cover, jacket, working pressure 87 psi (6 bar), maximum temperature 428 deg F (220 deg C). Motor 22.5 hp/30 kW, 380 volt, arm speed 27/20 rpm details
|
More Info
Gallons: 1.9
Material: Stainless steel
Blade Type:
HP:
10755063
Used- AMK mixer extruder model VIV-4, 2.5" discharge screw, 208 volt operation at 60 hz, sigma jacketed stainless steel tangential bowl with one gallon working capacity, apprximately 1.9 gallons total capacity, bowl dimensions are 7.75" front to back, 7.75" left to right, and 7" deep, site glass, safety grid lid including vacuum cover. details
|
More Info
Gallons: 109
Material: stainless steel
Blade Type: sigma
HP: 15
41785014
Used-AMK Mixer/Extruder M/S, stainless steel, 198 gallon (750 liter). Body 43" x 26" x 50" (1090 mm x 915 mm x 1270 mm) with a 9.9" (250 mm) diameter extruder discharger mounted to give 27.6" (700 mm) ground clearance. With mild steel sigma Z blades driven by 2 OFF 15 hp/11 kW drives. (The sigma Z blades could take up to 50 hp/37 kW motor.) Size 10.5' x 6.2' details
|
More Info
Gallons: 53
Material: CS
Blade Type: Z
HP: 15
10147001
Used-AMK Z-blade mixer "extrusion kneader", type VI-U, in carbon steel, ceramic coating inside, capacity ± 200 liter (53 gallon), trough sizes 700 x 700 x 500mm (27.5'' x 27.5'' x 20''), with cover and jacket, adjustable packing glands, motor 11.0 kW (15 hp), 380 volt, screw discharge, screw diameter 180mm (7''), motor 7.5 kW (10 hp), 380 volt, with switch, details
|
More Info
Gallons: 75
Material: stainless steel
Blade Type: overlapping
HP: 2
11690000
Used-Day mixer/extruder, 75 gallon working capacity. Stainless steel shell atmos at 353 deg F, carbon steel jacket 125 psi at 353 deg F. 32" x 32" bowl, 135 deg spiral blades overlapping, 10" diameter discharge screw, geared one end, packing glands with air purge, chain driven by (2) 25 hp variable speed motors 3/60/230/460V, gearboxes have no tags. Includes details
|
More Info
Gallons: 150
Material: 347/321 STAINLESS STEEL
Blade Type: SIGMA
HP: 20
90231
USED- AMK Mixer/Extruder, 150 gallon working capacity, 347 stainless steel. Non-jacketed bowl approximately 39-3/4" front to back x 47" left to right x approximately 43" deep. 321 stainless steel sigma blades driven by a 20 hp, 3/60/230/460 volt, 1760 rpm motor. Hinged top cover, geared one end. Approximate 11" diameter x 64" long 321 stainless steel screw details
|
More Info
Gallons: 115
Material: CARBON STEEL
Blade Type: SIGMA
HP: 40
89082
USED- Jaygo Mixtruder, Model AME700SSF, Carbon Steel. Approximate 115 gallon working capacity, 225 total. Jacketed bowl approximately 35.43" front to back x 39.37" left to right x approximately 32" deep, rated 125 PSI steam. Sigma blades geared one end. Front blade 34 RPM, rear blade 23 RPM. Approximate 2 HP hydraulically operated domed top cover, not details
|
More Info
Gallons: 300
Material: SS
Blade Type: sigma
HP: 100
88446
USED: Baker Perkins/Guittard Mixer/Extruder. 300 gallon working capacity, 600 total, type MHE160SL, 304 stainless steel. 304 stainless steel jacketed bowl 54-3/4" front to back x 55" left to right x approximately 47" deep, rated 150 psi at 375 deg F. Cored tangential sigma blades, approximate 0-36 rpm front blade, 0-23 rpm rear blade. Domed top cover with details
|
More Info
Gallons: 1
Material: 304/316 STAINLESS STEEL
Blade Type: SIGMA
HP: 4
86740
USED- AMK Mixtruder, Type V1U-4, 1 Gallon Working Capacity. 304/316 Stainless Steel. Carbon steel jacketed bowl, 7-13/16" left to right x 7-13/16" front to back x approximately 7" deep. Hinged top cover with safety grate. 304 stainless steel tangential sigma blades. Approximate 2" diameter x 14" long discharge screw. Driven by a 3 KW (4 HP), 3/50/380 Volt, 1400 details
|
More Info
Gallons: 110
Material: stainless steel
Blade Type: sigma
HP:
85690
USED: Winkworth Machinery Mixer/Extruder, 110 gallon (500 liter) working capacity, type 43Z HMX:4.C10XX heat treated carbon steel. Jacketed bowl 42-1/2" front to back x 42-1/2" left to right x approximately 30" deep. Sigma style blades, geared one end. Counter balanced top cover. Hydraulically driven by (3) 22 kw, 3/50/415 volt, 1460 rpm motor power pack, details
|
More Info
Gallons: 1.33
Material: 304/317SS
Blade Type: Sigma
HP: 2
82688
USED: Baker Perkins/Guittard lab size mixer extruder, model LEX8. 1.33 gallon working capacity, 2.125 total, 304 stainless steel. Carbon steel jacketed bowl 8-1/2" front to back x 8-3/4" left to right x approximately 7-1/2" deep. 317 stainless steel tangential sigma blades, geared one end. Domed top cover with sight glass, suitable for vacuum. 28" diameter details
|
More Info
Gallons: 25
Material:
Blade Type: double sigma
HP: 25
519026
USED: J H Day Mixtruder, double sigma blade with extruder discharge, 25 gallon working capacity, 50 gallon total capacity, double arm spiral blades allow complete clean out of bowl. Bowl dimensions: 24" left-right, 25.75" front-back, 24.5" deep, 6.5" diameter discharge screw, jacketed bowl, flat cover with counter weight for easy opening, 25 hp Reeves vari-drive details
|
More Info
Gallons: 66
Material: Carbon Steel
Blade Type: sigma
HP: 20
73058
USED: AMK mixer/extruder, model VIU-250L, 66 gallon working capacity. Carbon steel. Jacketed bowl 30" left to right x 30" front to back x approximately 24" deep. Tangential sigma blades, geared one end. Approximate 8" diameter screw discharge. Top safety grate, domed top cover, suitable for vacuum, gear driven. Screw drive 20 hp, 3/60/440 volt, 1800 details
|
More Info
Gallons: 66
Material: Carbon Steel
Blade Type: sigma
HP: 20
73059
USED: AMK mixer/extruder, model VIU-250L, 66 gallon working capacity. Carbon steel. Jacketed bowl 30" left to right x 30" front to back x approximately 24" deep. Tangential sigma blades, geared one end. Approximate 8" diameter screw discharge. Top safety grate, domed top cover, suitable for vacuum, gear driven. Screw drive 20 hp, 3/60/440 volt, 1800 details
|
More Info
Gallons: 160
Material: Carbon Steel
Blade Type: sigma
HP: 30
70785
USED: AMK M-line mixer/extruder, model VIU-630-I-IV, 160 gallon, carbon steel. Jacketed bowl 43" left to right x 39" front to back x approximately 36" deep, rated 45 psi at 150 deg C. Tangential sigma blades, geared one end. Approximate 8" diameter screw discharge into an adapter clamp, 4" diameter outlet. Top safety grate, domed top cover, suitable for details
|
More Info
Gallons: 240
Material: Carbon Steel
Blade Type: sigma
HP: 52.5
70666
USED: AMK mixer/extruder, model VIU900I, carbon steel construction on product contact parts. 317 gallon (1200 liter) total, 240 gallon (900 liter) working. Jacketed bowl measures 51-1/8" left to right x 43" front to back x approximately 43" deep, rated for 75 psi (5 bar) pressure. Oil heated. Geared one end, tangential sigma blades, domed top hinged cover details
|
More Info
Gallons: 166
Material: Stainless Steel
Blade Type: sigma
HP: 10
70136
USED: AMK Mixtruder, stainless steel, 166 gallon working capacity. Non-jacketed bowl 40" front to back x 47-3/8" left to right x approximately 33" deep. Tangential sigma blades, geared one end. Driven by a 50 hp, 220/440 volt, 1175 rpm XP motor. 11" diameter x 64" long screw discharge, approximate 36" discharge height. Driven by a 10 hp, 230/460 volt, 1155 details
|
More Info
Gallons: 120
Material: Stainless Steel
Blade Type: Sigma
HP: 100
69302
USED: Linden mixtruder, model KIII 450A. 17-7PH stainless steel (product contact). Working capacity 120 gallon (450 liter), 170 gallon (650 liter) total. Carbon steel jacketed bowl, 39-1/2" left to right x 37-3/4" front to back x approximately 36" deep. Sigma blades, geared one end. (1) 9" diameter x approximately 55" long screw discharge with a 2-1/4" die. details
|
More Info
Gallons: 5
Material: Carbon Steel
Blade Type: Disper
HP: 10
65319
USED: J H Day Mixtruder, 5 gallon working capacity. Carbon steel shell atmos at 500 deg F, carbon steel jacket 125 psi at 500 deg F, bowl measures 13" front-back x 15" left-right, 135 deg spiral tangential blades, 3.5" diameter x 26" long discharge screw, geared at one end, packing glands, blades driven by 10 hp 230/460/1730 rpm Reeves variable speed details
|
More Info
Gallons: 530
Material: Stainless Steel
Blade Type: Sigma
HP: 57
64593
USED: Werner & Pfleiderer Mixer/Extruder, type UK20X-AU-4V. 316 stainless steel construction. Total capacity 793 gallon (3000 liter); working capacity 530 gallon (2000 liter). 56.6" x 65.5" x 54.6" deep (1450 mm x 1680 mm x 1400 mm deep). Sigma style blades, 7.8" (200 mm) diameter. Double jacketed, rated for 180 psi (12 bar) and vacuum. 11.7" (300 mm) discharge details
|
More Info
Gallons: 120
Material: Carbon Steel
Blade Type: Sigma
HP: 50
62246
USED: AMK mixer/extruder, type VIU. Carbon steel construction. Working capacity 120 gallon (450 liter). Bowl dimensions are: 39" long x 35" wide x approximately 35" deep (1000 mm long x 900 mm wide x 900 mm deep). Double jacketed rated to 45 psi (3 bar). Not rated for vacuum. Driven by a 37.5/51 hp, 25/34 kw gearbox turning the sigma style blades with a variable details
|
More Info
Gallons: 21
Material: Carbon Steel
Blade Type: Sigma
HP: 20
48594
USED: Werner and Pfleiderer mixer/extruder, 21 gallon working capacity, carbon steel, type UK12-AU3. Jacketed bowl est 75 psi. Bowl 20 1/2" left-right x 20 1/2" front-back x 19 1/2" deep. Sigma blades - tangential. 6" diameter screw. Standard packing glands. Counter balanced top cover. Belt driven thru gearbox 15 kw 380V/1475 rpm. Blade speed 17/21 rpm. details
|
More Info
Gallons: 15.8
Material: CARBON STEEL
Blade Type: SIGMA
HP: 5
48315
Used- AMK Mixer/Extruder, Type VIU-60L, 60 Liter (15.8 Gallon) Working Capacity, Carbon Steel. Non-jacketed bowl 19.75" left to right x 18.25" front to back x 15" deep. Sigma blades. 4.75" diameter screw discharge. Standard packing glands. Counter balanced top cover. Screw drive 3 kW, 3/50/380 volt, 1415 rpm gearmotor. Main drive 4 kW, 3/50/380 volt, 1430 details
|
More Info
Gallons: 150
Material: Carbon Steel
Blade Type: Sigma
HP: 20
42802
Used- Mixer-Extruder, Approximate 150 Gallon Working Capacity, Carbon Steel. Non-jacketed bowl measures approximately 43 1/2" left to right x 39 1/2" front to back x 31" deep. Tangential sigma blades, driven by an approximate 11/15 kW motor. Geared one end. Approximate 11" diameter aluminum screw, driven by a 7.5 kW, 3/50/380 volt, 1450 rpm motor. No details
|