|
|
89225
USED: Farrel Banbury mixer, model F80. Jacketed chamber, drop door design. 4 wing style cored rotors, approximate 35-70 rpm. Mixing chamber 80 liter, max batch weight 132 pounds. Ram feed. Driven by a 600 hp DC motor with SCR controller. Includes a hydraulic system, lube system, temp control panel and a Farrel Series 2000 operator panel. Built 1999. details
|
89079
USED: Farrel Banbury mixer, model F80. Approximate 80 liter, 21 gallon, 116 pound working capacity. Chrome plated chamber, carbon steel jacketed, drop door design. Wing style cored rotors, approximately 30-105 rpm. 10-1/2" x 24" feed opening with ram feeder. Driven by a 400 hp, 500 volt, 1150/2300 rpm DC motor thru a Farrel gearbox, drive ratio 11.652:1. details
|
|
|
85929
USED: Farrel Banbury mixer, model 00C. Jacketed chamber, drop door design, rated 150 psi water or steam. Wing style cored rotors, approx 125/62.5 rpm. Gross chamber liquid capacity 1.2 gallons. Max batch weight 7 pounds. Ram feed. Driven by a 30/15 hp, 3/60/440 volt, 1750/860 rpm motor. Includes a control panel with an ABB model ACS501 drive panel. details
|
82962
USED: Farrel Banbury mixer, model OOC. Carbon steel jacketed chamber, stainless steel swing side design. Chrome plated cored rotors. Gross chamber liquid capacity 1.2 gallons, max batch weight 7 pounds. Ram feed. Driven by an 84 kw (112 hp), 3/60/460 volt, 1700 rpm DC motor. Includes a control panel. Built 1986. details
|
77157
USED: Moriyama dispersion mixer, batch mixer/compounder, type D3-7.5. 3 liter mixing capacity, 8 total. Jacketed bowl 6-5/16" left to right x 9-1/4" front to back x approx 12" deep. Cored blades. Rotor speeds front approx 25 to 100 rpm, rear approx 16.7 to 66.7 rpm. Single ram air cylinder feed, manual crank tilt bowl. Driven by a 5.5 kw (7.5 hp) Beier variator details
|
74089
USED: Batch mixer/compounder, jacketed bowl approx 4" left to right x 5" front to back x 2-1/2" deep. Jacketed side open swing doors, 2 cored chrome plated2 wing rotors, weighted feed ram. Driven by a 3 hp, 3/60/220-440 volt, 1800 rpm gearmotor, ratio 16.8:1. Approx 100 final rpm. Mounted on a stand. details
|
70614
USED: Batch mixer/compounder, jacketed bowl approx 4" left to right x 5" front to back x 2-1/2" deep. Side open swing doors, 2 cored chrome plated, 2 wing rotors, weighted feed ram. Driven by a 3 hp, 220/440 volt, 1740 rpm thru a reducer, ratio 17.09:1. Mounted on a 34" high stand. Has start/stop control box. details
|
69846
USED: Stewart Bolling spiral flow laboratory mixer, carbon steel.Approx 9" wide x 9" long x 9" deep jacketed mixing chamber. Chromeplated cored blades, single ram cylinder feed, geared both ends. 2 hphydraulic tilt. Driven by a 30/15 hp, 460 volt, 1775/885 rpm motorthru a reducer, ratio 14:1. Unitized on a common frame with controls. details
|
68412
USED: Farrell Banbury mixer, model 00C. Stainless steel jacketedswing side (drop door design). Max steam or water psi 150, chromeplated two wing cored rotors with spherical roller bearings, grosscapacity of mixing chamber 4.24 liters. 5" diameter ram cylinder, maxpressure 100 psi. Chrome plated single slope V-bottom, stainless steelpneumatically operated details
|
|
|
|
|
|
|