|
|
40922001
Used-Metalchem Complete Pipe Extrusion Line. New 2001, consisting of Metalchem co-rotating twin screw extruder, screw diameter 70 mm (2-3/4"), L/D 40, 125 kW (168 hp), 405 rpm main engine, 0 kW (40 hp) heating power, 7 heating areas, 6 cooling areas, air cooling with (1) degassing station, (1) Dynisco plastic pump, (1) bath 6340 x 1050 x 1550 mm (250 x details
|
40607001
Used- Davis Standard profile line consisting of: (1) Davis Standard 1.25'' diameter single screw extruder, model DS12H, approximate 24:1 L/D ratio, electrically heated, air cooled, non-vented 3 zone barrel. Water cooled feed with a Conair rate auger feeder, model BFO, hopper, and magnet. 44 1/2'' centerline height. Driven by a 5 hp, 3/60/460 volt, 1745 details
|
524058
USED: Corrugated pipe line for DW HDPE pipes with a maximum diameter of 11.7" (300 mm) consisting of: (1) Reifenhauser single screw extruder, type RH801-1-90-30NB. 90 mm diameter screw, output 880 lb/400 kg per hour. 198 hp/132 kW main drive motor. (1) Corma corrugator with a diameter range of 9.75" to 11.7" inner diameter. Complete with feeding system. details
|
523725
USED: Corma corrugator complete with die head, type 120 HSL VAC.Mold blocks cavity sizes available: 1" x 0.78" (25 x 20 mm), 1.18" x1" (30 x 25 mm), 1.45" x 1.26" (37 x 32 mm). Air pressure max required15 psi (1 bar). Max line speed 131 feet per minute (40 m/min), drivenby DC 5 hp motor 3.7 kW. Mold block cooling fans 2.2 hp, 1.7 kW.Air chilling unit details
|
|
|
|
|
523469
USED: Betol Betopac tubing/straw line consisting of the following:50mm Betol model 5025, 24:1 L/D, non-vented extruder with electricallyheated, air cooled barrel. Has 14 kw DC motor. Includes gearbox with13:1 gearbox ratio, belt driven to DC motor. Has hopper, water cooledfeed throat, 6 zone temperature panel which is missing 3 controllers,and straw details
|
523470
USED: Betol Betopac tubing/straw line consisting of the following: 50mm Betol model 5025, 24:1 L/D, non-vented extruder with electrically heated, air cooled barrel. Has 14 kw DC motor. Includes gearbox with 13:1 gearbox ratio, belt driven to DC motor. Has hopper, water cooled feed throat, 6 zone temperature panel which is missing 3 controllers, and straw details
|
523471
USED: Betol tubing/straw line, new 1989. Line consists of thefollowing: Betol model 5025 50mm extruder. Extruder is belt drivenfrom 14 kw DC motor controlled to torque arm reducer. Extruder iselectrically heated, air cooled, has 42" centerline height andequipped with integral 6 zone temperature panel. Unit had 5 Eurotherminstruments which are missing but details
|
523011
USED: Davis Standard tubing line consisting of the following: (1) UsedDavis Standard extruder, model 20PB24, 24:1 L/D, electrically heated,air cooled, jacketed feed section, 6.53:1 gearbox ratio, 20 hp DCmotor with SCR controller, on unitized base with control panel with3 barrel, 2 die zones, feed hopper with Conair vacuum loader, new1984. (1) Used details
|
522533
USED: Reifenhauser/Krauss Maffei pipe extrusion line for PE pipemax 6-1/4" (160mm) diameter consisting of: (1) Reifenhauser singlescrew extruder, type HR338-1-70-25. 70mm, 25:1 L/D. Electricallyheated, air cooled, complete with gearbox and motor. (1) PE pipe head,type W120 including tool for 54mm/69.9mm/74.5mm/79.9mm/83.3mm/90mmdiameter. (1) Pipe head, details
|