More Info
HP: 27.75
Manufacturer: Dreher
Model: S26/82-GFS
42256001
Used-Dreher Granulator, type S26/82GFS. Material of construction is carbon steel. Two way introduction for 2 foils at the same time. 1014" diameter x 31.98" straight side (260 mm diameter x 820 mm straight side) rotor. 6 rotor knives and 4 bed knives. Belt driven by a 27.75 hp/18.5 kW-380 volt/50 cycle/3 ph motor. Includes blower and control panel. details
|
|
|
More Info
HP: 2.7
Manufacturer: Glatt
Model: TR 120-02
41286006
Used-Glatt Granulator, stainless steel, for dry or wet product. 1.5" (38 mm) diameter infeed hopper with cover, 4.7" (120 mm) diameter rotor, stator with 3 blades, 1.5" (38 mm) discharge chute. Variable speed drive 340 rpm to 1460 rpm. 660 - 1100 lbs/hour (300 - 500 kg/h) output. 2.7 hp/2 kW, 1440 rpm drive. Mounted on a stainless steel frame with casters. details
|
More Info
HP: 20
Manufacturer: Cumberland
Model: 484
10755073
Used-Cumberland Model 484 Granulator. Unit is equipped with a 3 knife open rotor and two bed knives. 14" x 16" cutting chamber. Unit is equipped with a tray style insulated feed hopper. 5/15" diameter screen opening. Unit is belt driven by a 20 hp, 460 volt motor including a starter and a panel equipped with stop/start buttons. Bin discharge. details
|
More Info
HP: 20
Manufacturer: Cumberland
Model: 584
10755071
Used-Cumberland Model 584 Granulator. Unit is equipped with a 3 knife open rotor and two bed knives. 14" x 20" cutting chamber. Tray feed insulated feed hopper. Unit has a 5/16" diameter screen opening and bin style discharge. Unit is belt driven by a 20 hp, 230/460 volt motor and includes starter with start and stop buttons. Unit is mounted on casters. details
|
|
|
More Info
HP:
Manufacturer: Dreher
Model: S 34/41 GFS
42094001
Used- Dreher S34/41 GFS granulator, 25 hp/18.5 kW motor, rotor diameter 13.4" (340 mm) and length 16" (410 mm)., (3) rotating and (2) fixed knives, 13.4" x 16" (340 x 410 mm) feeding chamber, output capacity 400 - 990 lbs/h (180 - 450 kg/h). 1.5 hp/1.1 kW blower with 600 cubic meters/h airstream, cyclone dimensions 8" x 24" (200 x 600 mm). details
|
More Info
HP: 20
Manufacturer: Ball & Jewel
Model: CG1620SCS
42045006
Used- Ball & Jewel model CG1620S CS granulator, equipped with a 3 knife open rotor, two bed knives and a 16" x 20" cutting chamber. Feed hopper is an insulated tilt back conveyor feed style. Unit has a 5/16" screen size and has an airveyor discharge. Belt driven by a 20 hp 230/460 volt motor including a starter and panel having start and stop buttons. details
|
More Info
HP: 20
Manufacturer: Cumberland
Model: 484
42045005
Used- Cumberland model 484 granulator. Unit is equipped with a 3 knife open rotor and two bed knives, 14" x 16" cutting chamber. Unit is equipped with a tray style insulated feed hopper, 5/16" diameter screen opening. Unit is belt driven by a 20 hp 460 volt motor and includes starter and a penle equipped with stop/start buttons. Bin discharge. details
|
More Info
HP: 25
Manufacturer: Rapid
Model: 1418K
42045004
Used- Rapid model 1418 K granulator. Unit is equipped with a 3 knife slant cut open rotor and two bed knives, 14" x 18" cutting chamber. Unit is equipped with a tray feed insulated hopper, 5/16" diameter screen opening, airveyor discharge, belt driven by a 25 hp 460 volt motor, includes starter and controls. Unit is mounted on casters. details
|
More Info
HP: 20
Manufacturer: Cumberland
Model: 584
42045003
Used- Cumberland model 584 granulator. Unit is equipped with a 3 knife open rotor and two bed knives, 14" x 20" cutting chamber, tray feed insulated feed hopper. Unit has a 5/16" diameter screen opening and bin style discharge. Unit is belt driven by a 20 hp 230/460 volt motor and includes starter with start and stop buttons. Unit is mounted on casters. details
|
More Info
HP: 20
Manufacturer: Rapid
Model: 1224KU
42045002
Used- Rapid model 1224 KU granulator. Unit is equipped with a 3 knife open style rotor and two bed knives, 12" x 24" cutting chamber. Unit has a tray freed style hopper with both hopper and sides insulated. Unit has 3/8" diameter screen size with a 6" right hand airveyor discharge, belt driven by a 20 hp 230/460 volt motor including starter and controls. details
|
|
|
|
|
|
|
More Info
HP: 10
Manufacturer: GRANUTEC
Model: 1212LPZ-10
41881004
Used- Granutec Granulator, Model 1212LPZ-10. Approximate 10" diameter x 12" long open rotor with 3 bolt on blades. Tilt back pelican feed hopper. Driven by a 10 HP, 3/60/230/460 Volt, 1750 RPM motor. Includes a bottom screen with 1/4" diameter holes, a 1 HP blower, and an 11" diameter x 7 1/2" straight side x 15" cone cyclone. Set up for blower discharge. details
|
|
|
|
|
More Info
HP: 125
Manufacturer: Rapid
Model: 2442H
10755042
Used-Rapid Model 2442H Granulator. 24" x 42" cutting chamber dimension. Conveyor infeed with pneumatic tilt back assist. Unit equipped with 5 knife open rotor. Dual flywheel, D2 bed knives with optional third if required. Unit equipped with 10mm (3/8") diameter screen with pneumatic screen cradle. 12" airveyor discharge. Driven by a 125 hp, 460 volt motor. details
|
More Info
HP: 150
Manufacturer: Cumberland
Model: 50B
10755041
Used-Cumberland Model 2050B Granulator. 20" x 50" cutting chamber that is equipped with hardfaced material and wear plates. Tray or conveyor feed included in quoted price. 5 knife hardfaced high shear rotor having D @ bed knives. 3/8" screen size, 10" OD airveyor discharge, driven by a 150 hp, 460 volt motor. Please call for additional options offered. details
|
|
|
|
|
More Info
HP: 150
Manufacturer: Condux
Model: OS650/200III-A
10755029
Used-Condux Model OS650/200III-A Granulator. 2 x 8" x 80" feed openings, 7 knife beam support rotor, (5) 15.5" segments each knife, tear type bed knives, 150 hp, 480 volt motor, hydraulically opened cutting chamber, 2 pc 1.5" holes screen, Airveyor discharge, film feed hopper, starter and controls not included. 1986 model year. details
|
|
|
|
|
|
|
|
|
|
|
More Info
HP: 25
Manufacturer: RAPID
Model: 1224K
40857001
Used- Rapid Granulator, Model 1224K. Approximately 12" diameter x 24" wide, 3 rows of 2 bolt on slanted blade open rotors. Tilt back pelican style feed hopper, set up for blower discharge with bottom discharge drawer. Approximate 3/8" diameter screen holes. Driven by a 25 hp, 3/60/230/460 volt, 1725 rpm motor. Mounted on casters. details
|
|
|
More Info
HP: 125
Manufacturer: Nelmor
Model: G3072
10755020
Used-Nelmore model G3072 granulator. 30" x 72" feed throat opening, 9 knife staggered rotor, 2 bed knife, dual 160 hp, 1165 rpm, 460 volt motors, dual flywheel, conveyor feed hopper, airveyor discharge. Includes starter panel and stand alone control panel having controls for granulator, blower, conveyor and screen cradle. details
|
More Info
HP: 150
Manufacturer: Alpine
Model: 80/100 Rotoplex
10755019
Used-Alpine model 80/100 Rotoplex cutting mill. 30", 40" feed throat opening, 8 knife underslung rotor, driven by a 150 hp, 460 volt motor, hydraulic screen cradle including approximate 2 hp motor and pump. Mounted on 49" tall x 77" wide x 139" long base. Includes one TB Woods S-Trac digital solid state starter rated at 150 hp, 4809 volt. details
|
More Info
HP: 150
Manufacturer: Cumberland
Model: X1400
10755018
Used-Cumberland model X1400 granulator. 24" x 56" feed throat, 7 knife twin shear rotor, 2 bed knife, 150 hp, 460 volt motor, conveyor feed hopper, electronic jack screw tilt back hopper assist, electronic actuator drop down screen cradle, mounted on plate base, 12" airveyor discharge. No starter or controls included. details
|
|
|
|
|
More Info
HP: 150
Manufacturer: Nelmor
Model: RG2244
10755012
Used-Nelmor model RG2244 granulator. 22" x 44" feed throat, 5 knife open rotor, 2 bed knife, 150 hp, 460 volt motor, dual feed insulated hopper, hydraulic assisted tilt back hopper and drop down screen cradle, sound suppression enclosure, forklift rail entry base, 8" airveyor discharge. Includes stand alone control panel that includes starters and controls details
|
|
|
|
|
More Info
HP: 3
Manufacturer: Conair / Wortex
Model: LP-330
40671002
Used- Conair/Wortex Granulator, model LP-330. Approximate 6" diameter x 7" long segmented helical type rotor with 3 rows of 5 blades. 7 3/4" x 7 1/4" carbon steel chamber. 12" x 12" top feed opening. Driven by a 3 hp, 3/60/230/460 volt, 1710 rpm gear motor, 11:1 ratio, 159 output rpm. Includes removable bottom discharge drawer and 1/4" diameter screen holes. details
|
More Info
HP: 3
Manufacturer: Conair / Wortex
Model: LP-331
40671003
Used- Conair/Wortex Granulator, model LP-330. Approximate 6" diameter x 7" long segmented helical type rotor with 3 rows of 5 blades. 7 3/4" x 7 1/4" carbon steel chamber. 16" x 16" top feed opening. Driven by an approximate 3 hp gear motor, 11:1 ratio, 79.1 output rpm. Includes removable bottom discharge drawer and 1/4" diameter screen holes. Mounted details
|
More Info
HP: 3
Manufacturer: Conair / Wortex
Model: LP-330
40671004
Used- Conair/Wortex Granulator, model LP-330. Approximate 6" diameter x 7" long segmented helical type rotor with 3 rows of 5 blades. 7 3/4" x 7 1/4" carbon steel chamber. 16" x 24" top feed opening. Driven by an approximate 3 hp gear motor, 11:1 ratio, 159 output rpm. Includes removable bottom discharge drawer and 1/4" diameter screen holes. Mounted on casters. details
|
More Info
HP: 3
Manufacturer: Conair / Wortex
Model: LP-330
40671006
Used- Conair/Wortex Granulator, model LP-330. Approximate 6" diameter x 7" long segmented helical type rotor with 3 rows of 5 blades. 7 3/4" x 7 1/4" carbon steel chamber. 24" x 24" top feed opening. Driven by an approximate 3 hp gear motor, 11:1 ratio, 159 output rpm. Includes removable bottom discharge drawer and 1/4" diameter screen holes. Mounted on casters. details
|
More Info
HP: 3
Manufacturer: Conair / Wortex
Model: LP-330
40671007
Used- Conair/Wortex Granulator, model LP-330. Approximate 6" diameter x 7" long segmented helical type rotor with 3 rows of 5 blades. 7 3/4" x 7 1/4" carbon steel chamber. 24" x 24" top feed opening. Driven by an approximate 3 hp gear motor, 11:1 ratio, 159 output rpm. Includes removable bottom discharge drawer and 1/4" diameter screen holes. Mounted on casters. details
|
More Info
HP: 3
Manufacturer: Conair / Wortex
Model: LP-330
40671008
Used- Conair/Wortex Granulator, model LP-330. Approximate 6" diameter x 7" long segmented helical type rotor with 3 rows of 5 blades. 7 3/4" x 7 1/4" carbon steel chamber. 16" x 24" top feed opening. Driven by an approximate 3 hp gear motor, 11:1 ratio, 159 output rpm. Includes removable bottom discharge drawer and 1/4" diameter screen holes. Mounted on casters. details
|
More Info
HP: 3
Manufacturer: Colortronic
Model: M253-2.2KW
40671009
Used- Colortronic Grinder, model M253-2.2KW. 10" x 10" carbon steel chamber with approximate 6" diameter x approximate 10" long rotor with 3 rows of 5 bolt on blades. 22" x 22" top feed opening. Driven by a 2.2 kW, 3/50/230/400 volt, 1420 rpm gearmotor, 107 rpm output. Includes 1/8" diameter holes. Mounted on casters. details
|
|
|
|
|
24770001
USED: Nelmore Granulator, model RG1220M1. Approximately 12" diameter x 20" wide 3 bolt-on blade closed rotor, (2) bed knives. Manual hydraulic tilt back pelican style feed hopper, bottom discharge, no drawer. Approximately 1/4" diameter screen holes. Driven by a 20 hp, 3/60/460 volt, 1755 rpm motor. Sound dampening side panels. Mounted on casters details
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
More Info
HP: 20
Manufacturer: Hamilton
Model: 60-35TD
40334001
Used-Hamilton/Tria Grinder, model 60-35TD. Approximate 12" diameter x 24" wide 3 bolt on blade open rotor, (2) bed knives. Tilt back pelican style feed hopper, bottom discharge drawer. Approximate 3/8" diameter screen holes. Driven by a 25 hp, 3/60/460 volt, 1750 rpm motor. Mounted on casters. OAD 4'W x 5'L x 8'T. Brand new auger and belts. details
|
|
|
|
|
More Info
HP: 20
Manufacturer: Allsteele
Model: 1417
89550
USED: Allsteele granulator, model 1417. Approximate 14" diameter x 17" wide 2 bolt-on blade closed rotor, bed knives. Tilt back pelican style feed hopper, bottom discharge with drawer. Approximate 3/8" diameter screen holes. Driven by a 20 hp, 3/60/230/460 volt, 1750 rpm motor. Mounted on casters. details
|
|
|
|
|
|
|
|
|
More Info
HP: 125
Manufacturer: Dreher
Model: S 60/100 SRV
523831
USED: Dreher plastic mill, type S 60/100 SRV. Complete line consisting of (1) Dreher mill, 48 rotor knives, 17 stator knives, 19 sieves 6-10 mm, driven by a 125 hp (90 kW) motor. (1) Jost sifter SUZ 600/-x1500. (1) Westa conveyor belt RG-42 340/320/8500 including metal detector. (1) Westa conveyor belt F150/130-130-400-430. (1) Dreher cyclone. (1) Reisner details
|
More Info
HP: 200
Manufacturer: Cumberland
Model: 20X50
89118
USED: Cumberland granulator, model 20X50. Approximate 20" diameter x 50" wide open rotor, requires blades. 20" x 50" feed throat with bolt on hopper. Driven by a 200 hp, 3/60/460 volt, 1780 motor. Approximate 1/2" diameter screen holes. Mounted on a frame. Includes a Chantland model 25HDS feed conveyor, 42" wide x 25' long, driven by an approximate 1 hp details
|
|
|
More Info
HP: 50
Manufacturer: ENTOLETER
Model: 1530F
88472
Used- Entoleter Film Grinder, Model 1530F. Approximate 15'' diameter x 30'' wide 7 blade open rotor. Approximately 8" x 30" feed throat with a film hopper, set up for bottom blower discharge. Approximate 500'' of screen area with 1/4" diameter screen holes. Driven by a 50 hp AC motor. Mounts on a carbon steel frame. details
|
|
|
|
|
|
|
|
|
More Info
HP: 45
Manufacturer: Kompass
Model: 800/1600
522583
NEW/UNUSED: Kompass granulator, type 400/600. Material of construction is carbon steel on product contact parts. 15.6" diameter x 23.4" straight side (400mm x 600mm) open rotor. 3 rows x 2 rotor knives (each row), 4 pcs of bed knives. Screen with 0.47"-0.78" (12-20mm) holes. Belt driven by a 45 hp/30 kw, 1500 rpm, 400 volt/50 cycle motor. details
|
More Info
HP: 198
Manufacturer: Kompass
Model: 800/1600
522559
NEW/UNUSED: Kompass granulator, type 800/1600. Material of construction is carbon steel on product contact parts. 31.2" diameter x 62.4" straight side (800mm x 1600mm) open rotor. 5 rows of 15 pcs x 20.7" (530mm) rotor knives, 6 x 20.7" (530mm) bed knives. Screen with 0.3" (7mm) holes. Belt driven by a 198 hp/132 kw, 1500 rpm, 400 volt, 50 cycle motor. Bearings details
|
More Info
HP: 15
Manufacturer: Rapid
Model: GK3029-KU
86368
USED: Rapid Granulator, model GK3029-KU. Approximate 8" diameter x 12" wide 3 bolt on blade open rotor. Tilt back pelican style feed hopper, bottom discharge drawer set up for blower discharge with blower and cyclone. Approximately 5/8" diameter screen holes. Driven by an approximately 15 hp, 3/50/380 volt motor. Built 1988. details
|
More Info
HP: 300
Manufacturer: Rotogran
Model: WO-4465-36HD
84802
USED: Rotogran Granulator, model WO-4465-36HD. 65" x 44" feed opening with hopper, approximately 65" wide 9 rows of 5 bolt-on blades, open rotor. Approximate 1/4" screen holes. Bottom blower discharge with a Cincinnati 40 hp fan, model RBE-19. Grinder driven by a 300 hp, 3/60/575 volt, 890 rpm motor. details
|
More Info
HP: 10
Manufacturer: Ball & Jewel
Model: CG-812
82987
USED: Ball and Jewel granulator, model CG-812. Approximately 8" diameter x 12" wide 3 bolt-on blade open rotor, 2 bed knives. Tilt back pelican style feed hopper, bottom blower discharge with 1 hp Dayton blower. Approximately 1/4" diameter screen holes. Driven by a 10 hp, 3/60/230/460 volt, 1745 rpm motor. Mounted on casters. Built 1996. details
|
More Info
HP: 7.5
Manufacturer: Ball & Jewel
Model: CG-812-SCSX
82989
USED: Ball and Jewel Granulator, model CG-812-SCSX. Approximate 8" diameter x 12" wide open rotor, requires 3 bolt-on blades, 2 bed knives. Tilt back pelican style feed hopper with approximate 1/16 hp paddle feed, bottom blower discharge, no blower. Approximate 1/4" diameter screen holes. Driven by a 7.5 hp, 3/60/230/460 volt, 1745 rpm motor. Mounted details
|
More Info
HP: 1
Manufacturer: Blower Application
Model: 7-6
82709
USED: Blower Application trim cutter, model 7-6, carbon steel. 2 bolt-on blade open rotor. Max trim width 7.5", caliper range 0.25 to 20 mil, air capacity 1000 cfm, static pressure loss 1.5" WG at 5000 fpm air velocity. Rotor speed 500 to 3600 rpm, driven by a 1 hp motor. Unit connected to a model 15-3 trim handling fan, driven by a 7.5 hp, 3/60/230/460 details
|
|
|
More Info
HP: 15
Manufacturer: Foremost
Model: SHD6
82407
USED: Foremost grinder, model SHD6, approximately 12" diameter x 18" wide 2 bolt-on blade open rotor, (2) bed knives. Tilt forward pelican style feed hopper, bottom discharge drawer. Approximately 3/8" diameter screen holes. Driven by a 15 hp, 3/60/230/460 volt, 1740 rpm motor. Mounted on casters, 2 missing. details
|
More Info
HP: 20
Manufacturer: MPG
Model: UP755
82102
USED: MPG Under the Press Granulator, model UP755. 6" x 55" long feed with a tilting hopper, (2) feed rollers driven by a 1 hp motor. Approximate 55" wide closed rotor driven by a 20 hp, 3/60/230/460 volt, 1750 rpm motor. Set up for blower discharge with a 5 hp blower with cyclone. Mounted on casters. details
|
|
|
More Info
HP: 10
Manufacturer: MPG
Model: UP735
82104
USED: MPG Under the Press Granulator, model UP735. 6" x 36" long feed with a tilting hopper, (2) feed rollers driven by a 1 hp motor. Approximate 36" wide closed rotor driven by a 10 hp, 3/60/208-230/460 volt, 1160 rpm motor. Set up for blower discharge with a 3 hp blower. Mounted on casters. details
|
More Info
HP: 20
Manufacturer: MPG
Model: UP755
82105
USED: MPG Under the Press Granulator, model UP755. 6" x 55" long feed with a tilting hopper, (2) feed rollers driven by a 1 hp motor. Approximately 55" wide closed rotor driven by a 20 hp, 3/60/208-230/460 volt, 1750 rpm motor. Set up for blower discharge with a 5 hp blower with cyclone. Mounted on casters. details
|
More Info
HP: 250
Manufacturer: Cumberland
Model: 3250B
81329
USED: Cumberland model 3250B granulator. 32" x 50" feed throat, 25 knife semi-hog open rotor, 2 bed knife, 250 hp 460 volt motor, dual flywheel, 12" OD airveyor discharge. Unit includes one Allen Bradley industrial control panel with starter and disconnect, two sets of spare knives, one Sterling #11 20 hp belt drive blower with 12" OD outlet, one free-standing details
|
|
|
More Info
HP: 10
Manufacturer: Wortex
Model: JC10
78612
USED: Wortex granulator, model JC10. 6" diameter x 15" wide involute parabolic segmented helical type rotor with 3 rows of 9 blades, 2 bed knives, damaged pelican type feed, driven by an approximate 10 hp motor, bottom discharge drawer and approximate 5/16" diameter screen holes. Mounted on casters. details
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
More Info
HP: 1
Manufacturer: Gloucester
Model: 50TP10
71501
USED: Gloucester grinder, model 50TP10. 3" wide x 40" long feed chute opening. (2) 4" diameter x 50" long rubber feed/pull rolls, driven by a 1 hp, 3/60/230/460 volt, 1725 rpm gear motor. (1) 6" diameter x 50" long closed rotor, 4 bolt on blades, approximately 1/4" diameter screen holes. Driven by a 7 1/2 hp, 3/60/208-230/460 volt, 1745 rpm motor. Unit details
|
More Info
HP: 10
Manufacturer: WOR-TEX
Model: JC 10
70246
Used- Wor-Tex Granulator, Model JC 10, Carbon Steel. Approximate 7" diameter x 15" wide involute parabolic segmented helical type rotor with 3 rows of 9 blades, 2 bed knives, 15" x 16" pelican type feed, driven by an approximate 10 HP motor. Unit has controls, bottom discharge drawer and approximate 5/16" diameter screen holes. Mounted on casters. details
|
|
|
|
|
|
|
|
|
|
|