Sägen für Platten und Profile Kunststoffanlagen Zubehör

42232001
Used- Greiner Traveling Cut Off Saw, Model GET CUT  S/500. Approximate 18’’ diameter blade, 320 x 140 maximum profile width and height range. Servo driven, 3kw, 230 volt motor. Built 2006. details

41592014
Used- CDS Traveling Cut Off Saw, Model CSS 6.5-13.  Up acting blade, 26'' servo traveling table. Top hold down. Profile cross section 3.5'' high x 13'' wide. Maximum O.D. 6.7''. Blade rpm 2156. 3/60/575 volt. Built 2004. details

41592016
Used- CDS Traveling Cut Off Saw, Model CSS 6.5-13.  Up acting blade, 26'' servo traveling table. Top hold down. Profile cross section 3.5'' high x 13'' wide. Maximum O.D. 6.7''. Blade rpm 2156. 3/60/575 volt. Built 2003. details

41592018
Used- CDS Traveling Cut Off Saw, Model CSS 6.5-13.  Up acting blade, 18'' AC traveling table. Top hold down. Profile cross section 3.5'' high x 13'' wide. Maximum O.D. 6.7''. Blade rpm 2156. 3/60/575 volt. Built 2001. details

41592020
Used- Metaplast Traveling Cut Off Saw, Model MST-4.  Up acting blade, 16.6'' traveling table. Top hold down. Pipe capacity 6'' diameter, Profile cross section 2.5'' high x 7'' wide. Approximate 12'' diameter blade. details

41592025
Used- CDS Traveling Cut Off Saw, Model 4.5-8. Up acting  blade, 18'' AC traveling table. Top hold down. Profile cross section 2.5'' high x 8'' wide. Maximum O.D. 4.7''. Blade rpm 330. 3/60/575 volt. details

41592027
Used- CDS Traveling Cut Off Saw, Model CTS 6.5-13.  Up acting blade, 18'' AC traveling table. Top hold down. Profile cross section 3.5'' high x 13'' wide. Maximum O.D. 6.7''. Blade rpm 2156. 3/60/575 volt. details

41343004
Used- Conair Air Traveling Cut Off Saw, model MST6-L.  18" diameter up acting blade, traveling table. Top air operated hold down. Driven by a 3 hp, 3/60/208-230/460 volt, 1745 rpm motor. Includes a M600 panel. details

41466012
Used- Conair Air Traveling Cut Off Saw, Model MST-8-L-R.  Approximate 18" diameter up acting blade, traveling table. Top air operated hold down. Driven by an approximate 3 hp motor. Includes a Durant panel. details

40158065
Used- RDN Traveling Saw, model 2418. Approximate capacity  2" x 4" profile, 2" O.D. tubing. Driven by a 1 1/2 hp, 3/60/208-230/460 volt, 3450 rpm motor. details

40158067
Used- RDN Traveling Saw, model 2418. Approximate capacity  2" x 4" profile, 2" O.D. tubing. Driven by a 1 1/2 hp, 3/60/460 volt, 3450 rpm motor. details

40158014
Used- RDN Traveling Saw, Model 2418. Approximate capacity  2" x 4" profile, 2" O.D. tubing. Driven by a 1 1/2 hp, 3/60/208-230/460 volt, 3450 rpm motor. details

89481
USED: Royal Machine dual lane traveling cut off chop  saw, model 369. (2) Approximate 14" diameter blades, pneumatically adjustable hold downs. Each saw driven by an approximate 3 hp motor. Includes a control panel. Built 1999. details

89306
Used- Becz Machine Traveling Cut Off Chop Saw, Model  101. Approximate 14" diameter blade, pneumatically adjustable hold downs. Approximate 24" saw travel. Driven by a 2 hp, 3/60/575 volt, 3450 rpm motor. Includes a control panel. Built 1988. details

523512
USED: Conair model PCCS-10-30 traveling cut-off saw.  30" diameter blade, 34" + 4" saw bed height, 5 hp Arbor motor blade drive, 230/460 3 phase operation, requires 65 psi air pressure. details

88000
Used- Custom Downstream Systems Upacting Traveling  Miter Saw, Model CTMS-6.5-13. Approximately 14" diameter blade, pneumatically adjustable top clamp. Can be set to 15, 30 and 45 degree angles. Driven by a 3 hp, 3/60/575 volt, 1740 rpm motor. Includes a 2 hp blower, electronic length controller and control panel. Base mounted. Built 2000. details

87584
USED: Metaplast Air Traveling Cut Off Saw, model MST-4.  12" diameter up acting blade, traveling table. Top air operated hold down. Driven by an approximate 3 hp, 575 volt motor. details

85645
USED: Holzma Automatic Upacting Panel Saw, model EL-60-3100.  Panel size max cutting length 122" (3100mm). 16" diameter blade, driven by an approximate 5 hp motor. 10' wide x 10' long infeed table, pneumatic fence, 10' wide x 7' long outfeed table. Includes a scoring saw and Holzma Compumatic operator's control panel. Built 1987. details

83944
USED: Royal model 384 upacting traveling miter saw.  Pneumatic hold down and vacuum. details

83760
USED: Royal Single Lane Panel Saw. Includes control  buttons, edge guides and work surface. details

81590
USED: Progressive Systems dual rip saw. Approximate  10' wide area, (2) 14" diameter blades, manually adjustable, each driven by a 10 hp, 3/60/230/460 volt, 1745 rpm motor. 44" table height. Mounted on casters. details

80349
USED: Gatto table saw, model HS.2.4, 12" diameter saw  blade. Unit can accept up to 4" wide x 2" tall or 2" diameter product. Saw driven by 2 hp motor, 2 pneumatic product guides. details

80351
USED: Sakas table saw, model SP8. 24" diameter saw  blade. Unit can accept up to 7" wide x 6" tall product. Saw driven by 5 hp motor. details

80353
USED: Sakas table saw, 24" diameter saw blade. Unit  can accept up to 5" wide x 7" tall product. Saw driven by 5 hp motor. details