Profile - Rohre Kunststoffanlagen Zubehör

10755054
Used-CDS Pipe Haul Off Model CCH460-L-SP. Cleated chain  for 7" x 9" slab, four traction beams with 60" contact length with 2" x 7.25" x 4.75" flat cleats, pendulum mounted upper beams for positive grip pneumatic clamping, mechanical heavy duty height adjustment for lower beam, pneumatically controlled clamping pressure side beams, 42" centerline height adjustable details

41705008
Used- RDN Belt Puller, Model 160-12. 12" wide x 60"  long belts, pneumatically adjustable. Driven by an approximate regulated 2 hp motor. details

41592009
Used- Custom Downstream Systems Cleated Belt Puller,  Model CCH-60-8. (2) 8'' wide x approximate 60" contact area cleated belts. Approximately 1/2 to 13 feet per minute. Each belt driven by a 2.16 hp AC motor with inverter and gear reducer. Built 2001. details

41592011
Used- Custom Downstream Systems Belt Puller, Model  CBH-36-12. Right to left operation. (2) 12'' wide x approximate 36" contact area belts. Approximately 2 to 27 feet per minute, 6'' daylight opening. details

41592013
Used- Farris Belt Puller, Model 550. (2) 4'' wide x  approximate 21" contact area belts. Approximately 4'' per minute to 74 feet per minute. Includes a DC/SCR drive. details

41466006
Used- RDN Belt Puller, Model 180-18-S. (2) 17-1/2''  wide x 60" long contact length rubber belts, manually adjustable. Driven by a 5 hp, 3/60/230/460 volt, 4500 rpm motor thru a reducer. Includes an Allen Bradley PowerFlex 700 panel. Built 2007. details

90488
USED: Conair puller, model PC8-50. (2) 7-3/4" wide  x 50" long contact areas. Adjustable cleated belts. Each belt driven by a 2 hp, 3/60/230/460 volt, 1750 rpm gearmotor. Low speed 4 fpm, high speed 40 fpm. Includes an infeed chute. details

89276
Used- Becz Machine Belt Puller, Model 051. (2) 8" wide  x 8' long contact area. Top belt motorized adjustment, bottom belt manually adjustable. Driven by an approximate 5 hp motor. Includes control panel. Built 1986. details

89228
USED: Versa puller/cutter machine consisting of: (1)  Versa puller, model C22. (2) 2" wide x 12" contact length manually adjustable rubber belts driven by a 1/2 hp, 90 volt DC motor. (1) Versa cutter model F7-2, driven by an approximate 1/32 hp motor. Includes a 3" wide x 68" long take away conveyor, no drive. details

87799
USED: Lorik Belt Puller, (2) pneumatically adjustable  rubber belts, 3" wide x 12" long contact area. Driven by a 1.1 kw Servo motor with controls. details

87801
USED: Lorik Puller/Cutter, model 90 H/2. 3" wide x  12" long belt puller with 1 hp motor, pneumatic adjustment, 3/4 hp cutter, 230 volt. details

86629
USED: Belt Puller, 6" wide x 60" long, flat belts,  individually driven by 2 hp, 230/460 volt motors with VFD, pneumatic gap adjustment, on base with casters. details

86631
USED: Belt Puller, 6" wide x 45" long, flat belts,  individually driven by 1.5 hp, 230/460 volt motors with VFD, pneumatic gap adjustment, on base with casters. details

86634
USED: Belt Puller, 7" wide x 72" long cleated belts  with 7.5 hp DC drive with SCR controller, pneumatic gap adjustment, on base with casters. details

86636
USED: Technoplast Puller/Traveling Saw Combination.  7" wide x 72" long belt puller, chain driven, with dual pneumatic gap adjustment, with 14" diameter chain driven traveling saw and chain driven traveling table. System complete with drives and controls on unitized base. details

85738
USED: Actual Puller/Cutter, model ARZ3000. (2) 9" wide  x 100" long contact area, pneumatically adjustable cleated rubber belts, approximate 6" daylight. Driven by an approximate 5 hp motor. (1) Upacting traveling saw. Built 1988. details

85742
USED: Actual Puller/Cutter, model ARZ3000. (2) 9" wide  x 100" long contact areas, pneumatically adjustable cleated rubber belts, approximate 6" daylight. Driven by an approximate 5 hp motor. (1) Upacting traveling saw. Built 1988. details

85236
USED: Metaplast Puller, model PB4C. (2) 3.5" wide x  26" long contact area, manually adjustable rubber belts. Driven by a 2 hp DC gearmotor. Approximately 7 to 72 feet per minute. details

85033
USED: Metaplast Puller, model PB4C. (2) 5" wide x 26"  long contact areas, manually adjustable rubber belts. Driven by a 2 hp DC gearmotor. Approximately 7 to 72 feet per minute. Includes a Penta Drive DC motor speed control. details

83128
USED: Boston Matthews Belt Puller, model C650VT. (2)  Manually adjustable belts, 4" wide x 24" long contact area. Driven by an approximate 1 hp gearmotor. Feet per minute min/max 9/195. Control panel incomplete. Base mounted. details

79492
USED: Belt puller, 8" wide x 38" contact area. Manually  adjustable rubber belts, approximate 3" daylight. Driven by a 1.5 hp, 3/60/230/460 volt, 1725 rpm gearmotor, ratio 250:1. Unit includes a Reliance SP500 drive panel. Used 25,824 hours. details

68083
USED: Vulcan cutter/puller. (2) 3" wide x 14" long  rubber pull rolls. (1) 10" diameter saw blade, 3" wide discharge belt, driven by a 1/2 hp motor. Unit includes controls. details