40511001
Used- JWI J Press filter press, model 630G32-29-8SYLW. (29) 25'' X 25'' X 2 1/2'' thick x 1/2'' recess polyproplene plates, (1) head, (1) tail plate. Approximately 121.53 square feet filter area, 10.13 cubic feet cake capacity. 100 psi maximum feed pressure, 4500 psi hydraulic closing pressure. Center feed, corner discharge, single ram, air over oil. Includes details
|
40511003
Used- Durco filter press. (58) 47'' X 47'' X 2 1/2'' thick x 1/2'' recess polyproplene overhead suspended plates, (1) head, (1) tail plate. Approximately 889.7 square feet filter area, 74.1 cubic feet cake capacity. Center feed, corner discharge, dual ram, hydraulic power pack. Includes plate shifter, bombay discharge doors, and control panel. Mounted details
|
|
|
40464001
Used- JWI filter press, model 800G32-23-11/5DA. (24) 31 1/2" x 31 1/2" (800 mm x 800 mm) polypropylene plates, approximate 1" cake. Approximate 125.22 square feet filter area, 10.44 cubic feet capacity. 100 psi max filtration pressure, 3300 psi hydraulic closing pressure. Center feed, four corner discharge, single ram, air over oil. Mounted on a carbon details
|
40464002
Used- JWI filter press, model 800G32-30/50-15/25DA. (31) 31 1/2" x 31 1/2" (800 mm x 800 mm) polypropylene plates, approximate 1" cake. Approximate 163.33 square feet filter area, 13.61 cubic feet capacity. 100 psi max filtration pressure, 3300 psi hydraulic closing pressure. Center feed, four corner discharge, single ram, air over oil. Mounted details
|
40551001
Used-BDP Industries mobile belt filter press, model 3DP. One (1) meter capacity, 3.2 meter wide belt, 290 mm long x 164 mm wide x 132 mm high. Currently mounted on curtain side step deck trailer including sludge pump, polymer system including mix tank, 17 foot BDP gravity belt section, rear ejection conveyor, wash water booster pump and control panel. details
|
|
|
|
|
|
|
|
|
40376001
Used-Parkson 2 meter belt filter press. Includes Moyno pump, Goulds pump, (1) new stainless steel control panel, (1) new control cabinet with Allen Bradley PLC, tank with new agitator, new polymer feed pump (in box), new belts, new bearings, heavy duty industrial epoxy primer and paint (15 mils thick). Reported to be reconditioned. details
|
|
|
|
|
|
|
|
|
|
|
REQUEST PRICE QUOTE
Cubic Feet: 87
Square Feet: 1053
Material: carbon steel/poly
Manufacturer: Sperry
90342
USED: Sperry filter press, type 21, size 48. (85) 48" x 48" polypropylene plates, approximate 1/2" deep recess each side. Approximate filter area 1053 square feet, approximate 87 cubic feet cake capacity, 100 psi max filter pressure. (1) Head, (1) tail plate, center feed (4) corner discharge, single ram. Air/oil hydraulic closure. Includes an overhead details
|
REQUEST PRICE QUOTE
Cubic Feet: 43.75
Square Feet:
Material: carbon steel/poly
Manufacturer: Durco
90225
USED: Duro filter press, carbon steel frame. (36) 48" x 48" polypropylene plates, 43.75 cubic feet cake capacity, approximate 100 psi max filter pressure. Center feed 4 corner discharge, dual ram. Unit includes overhead plate shifter, approximate 25' long stainless steel discharge screw conveyor with a 5 hp motor. Built 1983. details
|
523900
USED: 1.7 Meter Ashbrook filter belt press mounted on a 45 footenclosed trailer. The trailer has fold down walkways on each sideand a front control room. The system is set up with two poly mixtanks, sludge pump, boost water pump, poly pump, belly drain pan andcontrol panel. Its only use was a trial run of 8,000 gallons of 2%sludge. Flow capacity is details
|
REQUEST PRICE QUOTE
Cubic Feet: 23.7
Square Feet: 284.4
Material: polypropylene
Manufacturer: JWI
89455
USED: JWI filter press, model 800N32. (39) 32" x 32" polypropylene plates, approximate 1" cake. Approximate 284.4 square feet filter area, 23.7 cubic feet capacity. 100 psi max filtration pressure, 3300 psi hydraulic closing pressure. (1) Head, (1) tail. Center feed, four corner discharge, single ram air over oil. Mounted on a carbon steel frame. details
|
89399
USED: Perrin filter press, (50) 59" x 59" polypropylene plates, approximate 1" cake. Approximate 82.69 cubic feet cake capacity, approximate 992.25 square feet of filter area. 3000 PSI cylinder closing pressure, 36.00 stroke. (1) head and (1) tail plate. Top center feed, four corner discharge, single ram, operated by a 5 HP, hydraulic pump. Includes hydraulic details
|
89400
USED: Perrin filter press, (52) 59" x 59" polypropylene plates, approximate 1" cake. Approximate 86 cubic feet cake capacity, approximate 1,032.75 square feet of filter area. 3000 PSI cylinder closing pressure, 36.00 stroke. (1) head and (1) tail plate. Top center feed, four corner discharge, single ram, operated by a 5 HP, hydraulic pump. Includes hydraulic details
|
REQUEST PRICE QUOTE
Cubic Feet: 30
Square Feet: 418
Material: polypropylene
Manufacturer: Shriver
89096
USED: Eimco Shriver filter press, model M1000FB. Carbon steel frame. (40) 39.3" x 39.3" x approximately 2-1/2" thick x approximately 1/2" recess polypropylene plates, (1) head plate, (1) tail plate. Approximately 418 square feet filter area, 30 cubic feet cake capacity, 100 psi max filter pressure. Center feed, four corner discharge, single ram. Includes details
|
523498
USED: Velo model type 800.97.16652.8, 800mm plate and frame DEfilter, 550 square feet, 850 liters internal volume, with 99 sanitarypolished stainless steel plates and frames. Each plate is 32" x 32"with 50 screen type filtering plates and 50 sludge frames, 4 eyeclosed delivery. The filter is equipped with automatic hydraulicclosing mechanism with reservoir details
|
|
|
522946
USED: 24" x 24" Eimco Shriver filter press, 14 plates, model M630FB.Maximum filtering pressure 225 psi. Maximum thrust 65 tons. Maximumoil pressure 1600 psi. Inlet air pressure 80 psi. With 14 polypropy-lene caulked and gasketed O-ring recessed plates. Flow design iscenter feed, four corner discharge. Plates are 2.25" thick and 24" x24" square, CGR design details
|
|
|
REQUEST PRICE QUOTE
Cubic Feet: 44
Square Feet: 1170
Material: carbon steel/poly
Manufacturer: Perrin
87117
USED: Perrin filter press, model 100-48. (44) 48" x 48" polypropylene chambers, approximate 1/2" deep. Total filter area 1170 square feet, 44 cubic feet cake capacity, approximate 100 psi max filter pressure, (1) head, (1) tail plate, center feed (4) corner discharge, single ram. Unit includes a side plate shifter and a 60" wide x 12' long x approximate details
|
|
|
|
|
REQUEST PRICE QUOTE
Cubic Feet: 13.78
Square Feet: 165
Material: carbon steel/poly
Manufacturer: Eimco
86834
Used- Eimco Shriver Filter Press, Model M800FB, carbon steel frame. (23) 31.5" x 31.5" x 2-1/2" thick x approximate 1/2" recess polypropylene plates; (1) head, (1) tail plate. Approximate 165 square feet filter area, 13.78 cubic feet cake capacity, 100 psi max filter pressure. Center feed, corner discharge, single ram. details
|
|
|
REQUEST PRICE QUOTE
Cubic Feet: .95
Square Feet: 22
Material: 316 stainless steel
Manufacturer: Ertel
86486
USED: Ertel plate and frame polishing press, model EUS-10-10, all 316 stainless steel. 16" x 16" plates and frames, (3) frames 2" thick, (4) frames 3/8" thick, (8) plates. Approximate 22 square feet filter area, approximate .95 cubic feet cake capacity. Head and tail plates, 1" tri clamp inlet / outlet. Hand ratchet closure. Mounted on a stainless steel details
|
REQUEST PRICE QUOTE
Cubic Feet: 50
Square Feet: 914
Material: polyprop/carbon stee
Manufacturer: Netzsch
86056
USED: Netzsch filter press, model 1200/LP/36. (36) 1200mm (47.2" x 47.2") polypropylene plates, approx 1/2" deep. Total filter area 914 square feet, 50 cubic feet cake capacity, approx 100 psi max filter pressure. Head and tail plates, center feed 4 corner discharge, single ram. Unit includes an overhead plate shifter and Bombay bottom doors. details
|
REQUEST PRICE QUOTE
Cubic Feet: .3
Square Feet: 4
Material: 304 stainless steel
Manufacturer: Star Systems
86139
USED: Star Systems filter press, model 4-12/8B/4P-2J, 304 stainless steel. (2) Plates 12 x 12, (2) jacketed frames and (2) regular frames 2" thick, (1) blank jacketed plate. Approximate .3 cubic feet cake capacity. Approximate 4 square feet of filter area. Corner feed/discharge. Manual closure. Mounted on a carbon steel frame with casters. details
|
REQUEST PRICE QUOTE
Cubic Feet: 50
Square Feet: 1219
Material: polyprop/cs
Manufacturer: Perrin
85798
USED: Perrin filter press, model 1200MM. (54) 1200mm (47.2" x 47.2") x 2-1/2" thick polypropylene plates, approx 1/2" recess. Total filter area 1219 square feet. 50 cubic feet cake capacity. Head and tail plates, center feed 4 corner discharge, single ram, air over oil. Unit includes a motorized side plate shifter, control panel and Bombay bottom doors. details
|
REQUEST PRICE QUOTE
Cubic Feet: 51.6
Square Feet: 477
Material: carbon steel
Manufacturer: Quantum Technologies
85101
USED: Quantum Technologies filter press, carbon steel frame. (43) 39" x 39" polypropylene plates, approx 477 square feet filter area, approx 51.6 cubic feet cake capacity, approx 100 psi max filter pressure, head and tail plates, center feed (4) corner discharge, single ram. Air over oil, max 2500 hydraulic losing pressure. details
|
|
|
REQUEST PRICE QUOTE
Cubic Feet: 3.47
Square Feet: 83.4
Material: 304 stainless steel
Manufacturer: Filtrox-Werk
84882
USED: Filtrox plate and frame polishing press, 304 stainless steel. 25 stainless steel plates 15-1/2" (400mm) x 15-1/2" (400mm) and 11 stainless steel frames 15-1/2" (400mm) x 15-1/2" (400mm), 1" thick. Approximate 83.4 square feet filter area, approximate 3.47 cubic feet cake capacity. Corner feed, corner discharge, manual closing device. Mounted on details
|
<